With this coupling you click a hose onto a pump, a tap or another hose in a quarter turn. No threads, no tools, and uncoupling is just as quick. That pays off above all when you move the hose around: from the rain barrel to the pump, from the tap to the watering can.
Which size do you need
The size is the inner diameter of your hose. We state it in millimetres with the inch size after it:
- 12 mm (1/2")
- 15 mm (5/8")
- 19 mm (3/4")
- 25 mm (1")
- 32 mm (1 1/4")
- 38 mm (1 1/2")
The tail slides into the hose and you secure it with a hose clamp. If in doubt, measure the inside of the hose, not the outside. If the hose has to bend right after the coupling, see the angled hose tail.
Specifications
- Material: brass, with an NBR seal
- Lug spacing 40 mm, universal with all common GEKA and GK couplings
- Resistant to water, oil, alkalis and acids
- Article numbers: 12 mm 04.0100 · 15 mm SB02251015 · 19 mm 04.0103 · 25 mm 04.0104 · 32 mm 04.0106 · 38 mm 04.0107
Connecting to a threaded fitting?
Then you do not need a hose tail but a threaded coupling: with a female thread if you screw it onto an external thread, or with a male thread if you screw it into an internal thread.
Note: this is not a Storz
GEKA and Storz both click together with lugs, but they do not fit one another. GEKA has a single lug spacing of 40 mm and belongs on garden and work hoses; Storz has lug sizes from 52 to 133 mm and belongs on construction pumps and discharge hoses.
Unsure about the size or the system? Call +31 85 210 08 97, daily from 07:00 to 19:00. A coupling that almost fits will leak.
Need advice?
Do you have questions about this product, how to use it or whether it suits your situation? Feel free to contact our customer service. We are happy to help.
