COMPLI 120/2 M MultiCut
Our most powerful lifting station with shredding mechanism:
The COMPLI 120/2 ME with MultiCut shredding system is used for the disposal of wastewater from special objects such as mobile sanitary facilities, toilets in production halls or houseboats.
The MultiCut shredding system allows wastewater to be pumped through long and small-dimensioned pressure pipes to the nearest sewer, following the terrain. This form of wastewater transport is often more cost-effective than disposal via free-fall pipes. The MultiCut shredding system offers maximum operational reliability and excellent discharge properties.
Pros and cons:
+ Submersible: no risk during flooding
+ High discharge head: connectable to pressure pipeline
+ Additional safety due to double non-return valve
+ Delivered ready for connection: incl. control panel
+ Variable connection options mean the unit can be placed almost anywhere
+ Possibilities to connect to SMART HOME systems
+ Reliable VORTEX impeller and PE 114l tank
- Pumps with shredding mechanism require back pressure: see stations without shredding system here
Why a Pentair lifting station?
The range of sewage lifting stations extends from small installations for processing a single toilet to large installations for hotels, businesses and industry. All installations operate automatically and differ in tank volumes and pump sizes. All installations are fully produced and assembled in our own factory in Germany. Here, Pentair also produces the various PE tanks itself.
Not 2 but 5 years warranty!
We are convinced of the quality of our products. That is why we give SHK-FACHBETRIEBEN a 5-year warranty on the purchase of selected products.
Register your pump to claim the warranty!
Scope of delivery:
Ready-to-connect tank installation (115 l) according to EN 12050 with clamp flange DN 100 for inlet height 180/250mm, variable inlet heights DN 150 (180, 275, 315 mm), DN 100 (180-340 mm), additional inlets, 50 mm horizontal and vertical, reducer DN 150/DN 100, assembled submersible pump(s), each with an elastic connection with clamps for the plastic pressure pipe, mounted non-return valve and a sliding sleeve for ventilation pipe DN 70, automatic level control, control system (protection class IP 44) with motor protection, sound insulation, transformer, mains-voltage-dependent, re-startable alarm system and potential-free contact for collective fault message, optical indication of rotation direction (three-phase), alarm and operation, manual-0-auto switch. On request, the installation can be equipped with a microprocessor control. Cable tank–control 4 m, Cable control–plug 1.5 m.
Delivered by pallet, please take into account the weight.
Technical specifications:
The submersible installations are suitable for general use in areas at risk of flooding. The control system must be installed in a flood-protected and well-ventilated area. The tanks made of high-quality polyethylene (PE) have freely accessible connection options, a revision opening at the top and an inlet clamp flange for easy installation. The inflow height can be varied depending on the installation:
- DN 50: 150, 250 mm, DN 100: 180, 250 mm
At the top of the tank there is a vertical inlet for a supply pipe DN 150 or DN 100. If the inlet at the back is not used, it must be closed with the closing set DN 150 (order separately!). These dual installations have two pumps on the tank, which switch alternately. In case of peak load, both pumps switch on simultaneously.
| 3. COMPLI 120/2 M | |
| Delivery head: | 20 meters |
| Flow rate: | 16 m3/hour |
| Power 1 pump: | 2.30 kW |
| Voltage: | 400 Volt |
| Tank capacity: | 38 liters |
| Weight: | 43 kg |
| Dimensions: | See images |
| Plug: | CEE |
| Power cord: | 4m H07RN-F |
| Free passage: | 7mm |
| Impeller: | Vortex, GRP |
Downloads:
1. Product data sheet COMLI 100/500/1000 MultiCut
2. User manual COMPLI Series
3. Promo sheet COMPLI series
Accessories:
For the accessories below, you can request a no-obligation quote from us. You will then immediately receive the current delivery times and a sharply priced total offer.
| Item | Description | Dimensions (mm) |
| PVC slide valve (1) | With 2 pipe connections, DN 100, PN 1 | 360x295 (HxW) |
| With 2 arrow connections, DN 150, PN 2 | 660x450 (HxW) | |
| Reducing socket (2) | 1.25" - 1.5" |
|
| 1.25" - 2" |
||
| Non-return valve (3) | R40 - 1.25" DN 40, PN 4 |
150x120 (HxW) |
| R50 - 2" DN 50, PN 4 |
150x120 (HxW) |
|
| Ball check valve (3) | R50 - 2" DN 50, PN 6 |
185x155 (HxW) |
| Shut-off valve (4) | 1.25" DN 32, PN 16 | 110x60 (HxW) |
| 1.5" DN 40, PN 16 |
125x60 (HxW) | |
| 2" DN 50, PN 16 | 140X70 (HxW) | |
| Hand membrane pump (5) | In case of emergency, H geod 15m |
640x1.5" (HxD) |
| Elastic connection (6) | 1.5" DN 40, PN 4 | 120x50 (HxD) |
| 2" DN 50, PN 4 | 150x63 (HxD) | |
| Hose clamp (7) | 1.25" or 2" | |
| Closing set (blind flange) (8) | Necessary for side connection, DN 150 |
*You must also install a Smart Home application in your home that can receive the FTJP signal.
Dompelpomp.shop installation service:
Would you prefer to have this pump installed by an expert in your home or property? You can! We work with certified installers who have been trained by our suppliers to install our lifting stations, submersible pumps and pump sumps. Feel free to contact our customer service for a suitable offer or read more about our installation service here.
No-obligation advice?
Do you have questions about this pump, how to use it, or whether it is suitable for your situation? Please feel free to contact our customer service, and we will do our best to help you.